Genuine OEM engines

Independent of engine manufacturers, we can build generators to any specification you need regardless of engine, controller, alternator or circuit breaker brands.

GENERATOR RANGES

The Reserve series are designed for standby applications where the generators are running less than 200 hours a year, we have built these units specifically for emergency backup power for apartments and non-essential buildings. The generators found in this range offers the following functions:

  • SmartGen controllers
  • 3 pole moulded circuit breakers
  • 8 hour fuel tanks
  • Bus bar connection
  • Remote start/stop quick connect plug
  • Citec Alternators with YD/SDEC/Baudouin engines

The Halo series are designed for prime fixed applications where the generators are running up to 16 hours a day, we have built these units specifically for generating power in construction sites, mobile cranes and motor starting. The generators found in this range offers the following functions:

  • Comap MRS16 controllers
  • 3 pole moulded circuit breakers
  • 8 hour fuel tanks
  • Bus bar connection
  • 2x15A outlets, 1x32A outlet
  • Remote start/stop quick connect plug
  • Leroy Somer Alternators with Kubota/Cummins engines

The Tomahawk series are designed for heavy duty prime applciations where the generators are running 24 hours a day, 365 days a year, we have built these units specifically for remote sites such as mining, camps and offices. The generators found in this range offers the following functions:

  • Comap MRS16 controllers below 90kVA
  • Comap IG200 controllers above 100kVA
  • 4 pole ABB moulded circuit breakers
  • 16-24 hour fuel tanks
  • Bus bar connection
  • 2x15A outlets, 1x32A outlet
  • Remote start/stop quick connect plug
  • Stamford Alternators with Volvo Penta/Kubota/Cummins engines

GENERATOR FEATURES

ABB Breakers and RCD

Forget about cheap breakers which don’t comply with Australian standards, our Kubota machines come with genuine ABB parts which guarantee acceptance in any state or site bringing high quality, accuracy and reliability.

CHEVRON LOUVRES

We have incorporated our brand into the louvres on our generator, not only to distinguish our machines from our competitors while also minimizing water ingress and maintaining air flow, no matter the climate all our machines are capable of operating from the cold hills of the Snowy mountains to the harsh Pilbara climates.

ABB Breakers and RCD

Forget about cheap breakers which don’t comply with Australian standards, our Kubota machines come with genuine ABB parts which guarantee acceptance in any state or site bringing high quality, accuracy and reliability.

True Heavy Duty

Our new canopy design is manufactured from 2.5mm steel and a mix of high and low density foam to ensure all frequencies of noise is absorbed keeping the decibel level as low as possible while the machine is running.

The 2.5mm canopy makes our canopies sturdy and stay in shape even after rough handling.

LOCKABLE DOORS

Lockable doors so access to control panel, engine, breakers and fuel cap can be secured.

Australian Standard

All our generators conform to AS3000, AS3008, AS3012, AS3017, AS3010.

Fork Tyne Pockets

Our Kubota range come standard with tyne pockets and centre lift points to allow for the machine to be easily lifted, moved and transported.

Comap Controller

Digital Comap IntelliNano controller capable of remote start/stop to allow our generators to be used on both prime and standby applications.

External Fuel

External fuel connection points and three way fuel valves make it seamless to connect to an external fuel tank.